Be Your Own General Contractor - A Good Choice For You?

We speak with many homeowners building their own homes who would like to save money by becoming their own general contractor. While it may be possible to save between 10% - 20% of project costs, it's important to take into account all of the responsibilities and the enormous investment of time. Think of being your own general contractor as being the president of your company. You will be required to to help. Home Project Managers cost less than a general contractor and can help you through parts of the project where you feel inexperienced.

Be available when needed and be on the job site as required, for an undetermined amount of time every day

Have more than an average understanding of general construction and home building

Set a construction schedule and meet strict deadlines

Juggle multiple tasks

Manage groups of people with different schedules and communication skills

Effectively work with the subcontractors

Check and sign off on the work performed by each subcontractor

Ensure that the crew is following safety procedures

Be able to solve problems that arise

Handle any schedule or material delays

Manage the financial aspects of the project, including budgeting, purchasing, and paying subcontractors.

As you can imagine, it's a big responsibility, and if not done correctly, it can cost you more time and money than if you had hired a professional general contractor to oversee your project. General contractors have established relationships with subcontractors and material suppliers, giving them leverage that the average homeowner does not. Also, in some cases, being your own general contractor can make it difficult to find financing, as lenders want to be assured the work is being done by qualified professionals.

Having such an enormous part in building your new home and being your own general contractor can certainly be a rewarding experience. If you want to be fully involved in building your home but are unsure whether you have what it takes, you might consider hiring a Home Project Manager

No doubt, the decision to be your own general contractor is a complex one. Know what is involved before undertaking such a big project and make the best decision for you.

About the Author: Jeremy Bonin, a principal partner of Bonin Architects & Associates (http://www.boninarchitects.com), is an award-winning green architect and the author of TIMBER FRAMES: Designing Your Custom Home. With a special interest in sustainable design and green homes, structural insulated panels (SIPs), as well as timber frame construction, Jeremy incorporates renewable energy practices where possible, including geo-thermal, solar, radiant heat, and energy-efficient foundation systems.

Glass Block Shower Sizes For Design and Installation Success

Understanding how to develop the right size shower base and shower walls with glass blocks does not need to be some mysterious process. If you'll follow the steps in this article you'll have an easy to clean, structurally sound, and unique shower you can enjoy in your home or commercial property for years to come.

Step 1) What type of glass block shower do you want?

There are basically two types of showers you can use - a shower without a door, and a shower with a door. Here's an overview of where to use both:

A) Showers without a door (walk in and roll in showers) - Door-less showers have become hot in bathroom design over the last 5 years. The two most popular types of these showers are walk in and roll in showers. The biggest advantage of walk in showers is you can eliminate the cost of the shower door and having to bend over to clean around the door's framing system. The roll in shower also does not have a door, but also eliminates the curb around the base that someone has to step over to get into the shower. This makes the shower much more accessible to those with special needs. The roll in shower base is gradually sloped in towards the drain. The biggest disadvantages of the doorless showers is their bases (or platforms) need to be sized larger.

B) Showers with a door (neo angle or corner showers) - Most showers have doors to prevent water from splashing out. A popular type of shower enclosure is a neo angle variety that is placed in the corner of a bathroom to conserve space. The advantage of a shower enclosure system with a door is that it can fit into tighter spaces (these showers can be as small as 32" or 36").

Step 2) What type of glass block shower base do you want? How do you size this base and design it out at your project site?

There are two generic types of shower bases available for block - (1) the preformed base and (2) the custom concrete base.

The preformed base is created and sized before it is brought to the job site and can be made out of acrylic, cultured marble, or other solid surface materials. It is generally thought to cost less than a custom base, which is often true, but not always. The biggest advantage of these types of systems is they are built as one solid unit to minimize the concern about water leakage through the base. The biggest disadvantage is their size cannot be adjusted at the job site. Pittsburgh Corning makes an acrylic right or left hand entry walk in glass block shower base measuring 72" x 51", a Neo Angle shower measuring 51" x 51", a Square corner shower measuring 48" x 48" and even an acrylic shower base 60" x 32" that can be used to convert a small existing tub space into a new contemporary shower!

The custom concrete or mud set pan base is sized at the new home, remodeling, or commercial building site. Since glass block cannot be cut like tile, you'll need to use layout cards that correspond to the size of the block units to make sure the custom base you'll make will match up with the specific block sizes for your design. Most of the layout cards are approximately 4" wide (3 7/8" is the exact size) to accommodate for the most common thickness of block used for showers. The other base thickness is 3 1/8" wide, although design options with this thickness series are more limited.

Step 3) Choosing the right sizes, shapes, and colors to make your glass block shower cool and unique.

There are a wide selection of block sizes, patterns, shapes, colors and even artistically designed murals available for your shower. Here's a brief overview of your options:

o Sizes and thicknesses of glass blocks for showers - Glass masonry units are made is both metric and American sizes. Most of the blocks available in the United States are American sized. The American sized blocks are available in 4" x 8", 6" x 6", 6" x 8", 8" x 8", and 12" x 12". Specialty shapes can help you turn corners, make 45 degree neo angle showers, create rounded or radius walls if you're looking to make a walk in or roll in shower, or finish off the end of the shower wall with a smooth bullnose look. The blocks have nominal sizes meaning the actual size of the block units is " smaller allowing for a mortar joint to adhere the block to one another (an 8" x 8" block actually measures 7 " x 7 "). The blocks for showers are 3" and 4" thick. Thinner block (3 1/8") are more cost effective, but shower design options are much more limited in this thickness of block.

o Patterns, designs and colored glass blocks - Blocks come in a multitude of patterns providing different levels of privacy, style, and design options. The block are now available in standard and custom colors, tints, and artistically decorated murals to match any interior design style. Check out a comprehensive block web site to see the possibilities.

Step 4) How tall should you make your glass block shower? What do you need to do to make it structurally sound? Most block showers are built on a curb (with the exception of the roll in shower) which is 4" to 5" in height. Since many shower heads are placed 84" above the finished floor consider building your glass block wall 80" tall (this will make the size of your glass block wall + the size of your base equal to the height of your shower head). To make the glass shower walls structurally sound they should be tied into side walls with anchors every third coursing of block (usually this is every 24").

Step 5) Don't worry about any of the first 4 steps and call a glass block shower supplier and installation professional - If you really don't want to figure out what size, shape, and shower base is best call a block specialty company who offers design, supply and installation services. This type of company will usually come to your home or business (without a charge), measure your shower space, figure out the possible types of bases and showers for you, and install it with a guarantee.

Mike Foti is President of Columbus Glass Block, Cleveland Glass Block and Mid America Glass Block of Cincinnati, Dayton, and Akron and Vice President Eastern Glass Block of New Jersey and New York. These companies are nationwide suppliers, glass block shower designers, and installation contractors of glass block windows, showers, walls, and specialty colored glass blocks. Mike can be reached at the following:

Tel. 614-252-5888 Nationwide 877-668-5888

mfotigb@aol.com

http://www.columbusglassblock.com/products-showers.aspx - glass block shower bases & systems

http://www.columbusglassblock.com/learning-center.aspx#LC5 - installing glass block shower walls

How To Kill Termites Effectively

There's no need to move to another town just because termites have started nesting in your home. There are ways and methods to learn how to kill termites as well as various companies that will do it for you. Know how to kill termites now and save your property.

Detecting Termites

Learning how to kill termites should not be the concern of homeowners with existing termite problems alone. Even if you do not have a problem yet you should also know how to kill termites. This is because termites can survive almost anywhere. If your house has wooden components in it and you have moist surroundings, then you are in danger of termite infestation.

Some cases of termite infestation may not be easily detected unless the damage has been done. It would therefore be a sensible idea to be watchful of winged termites, mud tunnels or hollowed wood that may all indicate the presence of termites.

Consulting Experts

In some cases, we may be tempted to perform the termite inspection and control ourselves. There is nothing really wrong with doing things yourself but asking experts to inspect your property and apply effective treatments is the rea5B4l answer to the question of how to kill termites. Extermination companies know better how to kill termites and stop them from coming back. Your only real task is to find a good company. You can do that by asking people you trust to recommend you one and comparing prices and services before choosing one.

Pre Treatment

Contractors know the right methods and techniques for pre treatment in order to prevent termite breeding. Before building a home, you can have your soil and wood pre treated with chemicals. You can also talk to your contractor about making sure that wooden parts and structures are safely elevated from the soil.

Baiting

The newest method of killing termites effectively is by baiting. Exterminators who use this method may use wooden monitors to first attract termites and then replace the monitors with treated ones. Treated baits contain chemicals that can be ingested by workers and taken back to the colony. Once fed to the other members, the treatment can inhibit molting and can eventually result in the death of colony members.

Chemical Barrier

Another method used by exterminators is the chemical barrier. In this method, trenches and hole may be made on the areas surrounding the foundation. The trenches can then be filled with chemicals that can prevent termites from reaching the house or returning to the soil. Non-repellent chemicals may also be used and when ingested can result in termite5AA death.

Tenting

Tenting is a complicated and aggressive answer to how to kill termites. As the name suggests, it involves enclosing the house in a tent and fumigating it. Of course, this would mean vacating the house and taking with you any edible items or medications that may be contaminated. The extermination company will usually inform you what you should remove from the house and what else you should do. Common sense also says that you should inform your neighbors about your tenting procedure so they can keep away from the area.

Discover how to kill termites effectively. For the top do it yourself termite control, trust only the advice of experts.

Tuckpointing

Tuck pointing is a growing industry. It has been around for thousands of years, but has become much more popular in the past ten years. This has spawned a number of innovations.

Originally, brick/stone masons would hammer and chisel out the mortar as needed. Then rinse away their dust allowing the new mortar to stick. After preparing the cracks for re-pointing, these masons would mix up new mortar to replace the old cracked mortar. At this point, they used a hopper or a trowel to hold their mortar, and a pointing trowel or a tuck-pointing trowel to push the mortar into the chiseled mortar-joint. After allowing the mortar to dr1C84y to a proper texture, these mortar-joints are tooled and brushed clean.

In todays market, tuck pointing is considerably different. We no longer have to hammer and chisel the mortar-joints to open the cracks up for repair. Most companies use an angle grinder fitted with a diamond-carbide blade prepared for the purpose of removal of the mortar. This innovation allows us to cut the mortar-joints out deeper and faster than had typically been done prior. This depth is about to of an inch deep, and allows for a better bond into the wall. This still requires the dust to be rinsed away to improve the ability to stick or bond in. In recent years, the new mortars are blended to match the original mortar of the masonry work. Note that not all companies are offering Custom Color Matched Mortars. (For companies that offer the Custom Color Matched Mortar System copy and paste this in your search bar). We also no longer need to use the pointing-trowel or tuck pointer to install the new mortar. This industry has adopted a tool used for grouting tile. It is called a grout bag, and it allows for more speed and accuracy when injecting the new mortars/grout into the mortar-joints. The mortar is still allowed to dry to a desired texture, then tooled and brushed clean.

Each of these new tools and processes has made this service faster, stronger, and more desirable. There are books and other reports available at http://alamomasonryrepair.com/products.htm which will help you to locate quality contractors in your area or guide you through the process of doing the project yourself.

James Nech is a Masonry Repair Contractor in the Dallas / Fort Worth area. His company has repaired thousands of homes restoring them to their original beauty. When he is not repairing Brickwork or other masonry he can be found talking or writing about it. For more articles on brick repair visit his website at http://www.alamomasonryrepair.com

Granite Tile Basics

If you want to know all about granite including the basics, key characteristics and the processing manner, this article will prove to be quite informative for you.

Granite is a natural stone that looks extremely beautiful and provides ultimate alternative for interior and exterior decoration. The stone is beautiful to look at and practical to use. People love to install it due to its durability and classy look.

When it comes to the origins of this stone, you would be surprised to know that granite is formed deep inside the earth due to the extreme heat and pressure appF8Flied by the atmosphere over thousands of years. The stone can be defined as an igneous rock formed due to the pressure applied to liquid magma between other layers of rock. Thereafter it cools and forms a layer of its' own.

The rock is amalgamated with different elements such as feldspar, mica and quartz. The process of cooling process is very slow. The suspended mineral elements inside the magma result into the crystalline look of granite. Granite is hard in nature due to the harsh origins and lengthy process that suspends several stabilizing elements within it. You can vouch for the durability of this stone.

As soon as the raw granite is removed from its bed, the first stage of granite processing starts and the stage is known as cutting. Here, the large portions of granite into manageable blocks. Thereafter, these blocks of granite are cut to size so as to utilize them as slabs and tiles with the help of wire saws treated with different types of durable abrasives such as sand, diamond and aluminum oxide.

High pressure water jets are also used to cut the granite in tandem with traditional wire saws. As soon as the process of cutting is accomplished, the stone undergoes three more processes that make them look like tile flooring or countertop slabs. The stone is polished on one side, calibrated and gauged.

Once the processes are over, the stones are ready to be used as tiles and slabs. Most commonly these tiles are used as kitchen installation and outdoor installation. The leftover granite tiles are used as cutting boards, coasters and fireplace surrounds.

If you want to care the granite tile flooring and countertops, the process is very simple. The stone is heat-resistant and works as worry-free countertop solution. You can use hot pots and plates on the surface of this stone directly. The granite tile is durable. However, it still requires your attention. You should consider the application of an appropriate sealant seriously. Consult a specialist to determine the variety of granite tile you want to install. The sealant acts as a protective coat for your granite tile. It protects the tile from moisture. You can purchase different types of cleaners and polishes to keep your granite tile free of dirt and scratch.

We, at BBM Impex are dedicated to represent the nation's treasure of natural stone. visit Granite supplier & exporter.

I am freelance writer, I have written on many fields that are under the sun. I have passion to play with words. Accuracy, clarity and impact are the hallmarks of my work.

I am not a "Shakespeare", and don't have ability to convert imagination and thoughts into words, If I have to define myself in a few words, I would say I am a copywriter, I have good command over research, expertise to explore extensively and ability to prove that. I can write on any subject, from beauty to intellect, food to travel, paradise to Hades, flowers to nuclear bombs, rainbow to Tsunami, pen to sword, Britney sphere to Halen Keller, Tumors to Health and fitness, celibacy to Seduction. You can also find some of my articles at Freelance SEO Copywriter and Article Ghost Writer

Reglaze a Bath Tub

Bathtub not looking as good as it should? Are you stuck with one of those outdated colors of the 1970's? With a few simple preparations and a lot of patience, you can learn how to reglaze a bathtub and save yourself the hassle of buying and installing a new tub.

Of course, you'll want to make sure that you work safely. Since refinishing a bathtub involves chemicals, some of which are toxic, make sure that you ventilate the area well before beginning. Also, protect yourself with a ventilator, safety goggles and gloves. Once protected, gather your supplies and get going! Give your tub a cursory cleaning and remove any loose caulking and gaskets.

Most bathtub refinishing kits come with several chemicals. The first two are chemical cleaning solutions that will remove soaps and oils from the surface of the tub and prepare it for the primer. Most kits require you to clean the tub with the first solution, scrubbing the tub with sandpaper, usually 220 or 240 grit. Once the tub is thoroughly scrubbed, rinse away any residue.

The second cleaning solution is applied next, usually with a specially designed cleaning pad that also scores, or roughs, the surface of the tub. This second step removes any remaining oil or soap and also provides "grab" for the primer. Rinse the tub again and dry with an old towel or paper towels.

The third solution in the kit is a primer reducer, a solvent that removes any remaining residue and prepares the surface for the primer. Carefully apply the reducer with paper towels. After this, repair any damage to the tub's surface and drain area with putty and allow to dry. After about 30 minutes, sand the repaired areas smooth with a fine grit sandpaper, clean with the primer reducer and dry.

It is time to mask the area around the bathtub that will not be refinished. Carefully apply tape and paper to the areas around the tub, burnishing any tape with your fingernail or a credit card to assure a good seal.

Next, you'll apply the base coat to the tub. Remember to wear your respirator for this part of the process, and make sure that your area is properly ventilated. Following the manufacturer's directions, mix the primer's components exactly and use a spray gun to apply to the bathtub. Allow the primer to dry for at least 30 minutes before applying the top coat.

Mix the paint for the topcoat following manufacturer's instructions. Apply the topcoat using the spray gun with even strokes. This topcoat will take about 48-72 hours to completely cure. Reglazing your bathtub can be a cost effective way to dramatically update your bathroom!

Claire Bowes is a successful Webmaster and publisher of bathtub remodeling. Claire provides more information on her site about bathtub refinishing and designs.

A New Bathroom Vanity Can Transform the Room

It may be time to remodel, or give your hallway bathroom with the 1970's decor a facelift. Perhaps you just want a design change to reflect your personal style. Whatever reasons you may have for tackling your bathroom asDF4 the next home improvement project, one of the most important furniture pieces you will need to select with care is a single bathroom vanity or a double bathroom vanity. The bathroom vanity tends to be the focal point or centerpiece in any bathroom so finding the right one is important.

Before you get started on your bathroom home improvement project, take the time to measure the space you will have for all your fixtures. If you are replacing the shower and toilet, measure these spaces and the size of the new fixtures you would like to put in their place. When measuring for your bathroom vanity, you will want to decide if you would like a single bathroom vanity or a double bathroom vanity. If you have a small space to work with or only one person uses the lavatory each day, a single vanity will be the obvious choice. However if you have the space, a double vanity is always a luxurious upgrade for your bathroom especially if more than one person at a time will be using it everyday.

Another thing to keep in mind when remodeling your bathroom is the interior design theme you are trying to create. When choosing a new bathtub, sink, vanity, or even the plumbing fixtures, consistency with a design theme is key. Whether you like antique, rustic wood, traditional, or contemporary styles for your new bathroom make sure that all elements work together to create a cohesive look. Nothing feels worse than spending all the money, time, and effort on re-doing your bathroom only to be dissatisfied with the final result because it just doesn't all work together.

There are many places to find vanities and such for your project, but one of the best places to find the lowest prices for your bath and shower fixtures or for discount bathroom vanities is online. If you take your time to find the right online company to do business with, you can find the best price for your new vanity, as well as get added discounts like free shipping or other incentives. Shopping online also helps you save time and energy, because you never have to leave home to find the perfect bathroom furniture and fixtures.

So no matter what reason you have for remodeling your bathroom make sure you do your homework to find the best bathroom vanity and other fixtures that may need replacing. Measure the space you have to work with in your bathroom decide on the decor theme you want to create with your bathroom facelift, and try shopping online for your bathroom vanity, shower, bathtub, and other accessories online for the best prices.

If you would like more information on bathroom vanities online, single bathroom vanities or double bathroom vanities, please visit Premiere Vanities.