Subfloor Damage From Poor Bathtub Installation - Read Bath Tub Fixture Manuals

You should never under estimate the amount of damage that water can do to your wood subfloor. Especially if this wood is underneath your bathtub. If the bathtub is not installed properly, you could find yourself replacing the wood underneath, within a short period of time. This repair is not uncommon and as more homeowners and handyman seemed to be doing projects like these, without the proper experience, it's becoming even more common.

I wish I had a solution to the problem, however, I don't. The best advice I could give anyone who is going to be involved in any home remodeling project, would be to get some books on what ever task you are about to undertake and read all of the information that you possibly can about the products you are going to be installing. This is extremely helpful for anyone who has never installed a bathtub or any bathtub fixtures.

If the product fails and was installed properly, the manufacturer should be responsible for the water damage. I have been reading the manufacturer's installation manuals for quite some time now and every once in a while, I find something that is of great value to me and I get to pass it on to my readers. That's what I'm doing right now.

Whether you want to remodel your bathroom to save money or you want to accomplish a task that you haven't done yet. I would recommend, taking the time to understand, exactly how the water flows off of and on to another section of the bath tub or shower on its way to the drain. Understanding the basics of bathroom remodeling can save you big money in the future.

Save yourself some money and make sure that you install your bathtubs properly. Taking a little time before you start to read the bath tub fixture manuals, can save you some money and grief in the future.

Find More Facts On Home Water Damage.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Check out These Amazing Home Damage Videos.

Five Things That a Termite Inspection Company Might Not Ever Say

I don't think that I've ever heard of a termite inspector, ever go to a home and not find any termites. Even if the home doesn't have any damage that is visible from the termites, it seems like it's always a good idea, to tent the home, just in case, for protection. Anyway, here's five things that you might not ever hear a termite inspector ever say.

1. Your house is free of termites. This means that there isn't, one termite on your property and the termite inspector isn't going to make any money. Let's face it, termite damage, whether it's visible or invisible, keeps these guys working.

2. Your house isn't going to fall down, if I don't do anything to stop the termites. I have seen homes, where termites have been working on them for quite some time and they still seem to stand up and function properly.

3. Termites don't eat much and I wouldn't worry about the damage. Most termite inspectors will tell you how much a termite in Hawaii or Africa will eat in a day, but doesn't seem to have an honest idea, how much damage they are doing to your home, if they can't actually see it.

4. Every one that works for our company, has at least 30 years experience, repairing any termite damage. Don't even get me started with this one.

5. We will replace all of the termite damage wood, back to its original condition. What they might say, is that they will replace the wood that is damaged by termites, that you can actually see.

There are plenty of great termite companies out there and this article was meant just to have fun with most of them. Termite damage can be a serious problem with some homes and I would suggest that you contact at least three termite inspectors, before proceeding ahead with any home repairs or use of chemicals.

Try not to forget, the only way that a termite inspection company will make any money, looking at your house, will be to find something wrong with it.

If you're really interested in basement remodeling and repairs, you should click on this link Easy Home Repair Tips . Get some great home repair advice that can make a big difference on any of your home remodeling projects.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link San Diego Remodeling Contractors

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

What If My Contractor Does Not Return My Call

This is one of the biggest problems in business today. You have some work done on your home in good faith that the contractor knows what he is doing. When all is said and done you have a problem that needs to be resolved as soon as possible. I really don't care how long it has been since the work was done. If you have a problem the least that your contractor can do is answer the telephone.

Some companies go out of business and others get to busy to respond to your problem. You will hear the old excuse "That's not my problem" or the ever popular " I didn't do that". I have been in business for over twenty years and had very few problems. Of course I built things to last as long as possible.

Keep in mind that some contractors are a one man operation and they might be on vacation. Some contractors do not answer their phones over the week ends or after business hours. So don't sink the ship to fast.

Do not call the Contractors Licensing Board or the Better Business Bureau unless it has been at least a few working days. I would give it at least a week or so. Oh yeah don't assume that the contractor got your message. Call a few times at the least.

It has always made me mad when I have to fix someone else's problems. I get the call when the other contractors won't respond. I listen to the home owner with regret for being in a business where I am considered a crook. This is one of the reasons why contractors in my business get out of it.

If you have the contractors address and they aren't responding by phone you can always send them a letter by certified mail. Request a return receipt. That's your proof that the company received your letter. Keep a copy for your files.

The good news for a home owner when a contractor will not respond to your calling them is the Department of Consumer Affairs. Most states have a complaint department of some sort that will listen to your complaints. Does this mean it will get resolved? NO there are no guarantees here.

If your state has a licensing board for contractors, this will be your next step.

This will get your contractors attention and there is a great chance they will respond now. If there are enough complaints against the contractor and they do nothing about them the contractors board will take their license away.

If your contractor does not respond after all of this. There is very little you can do about it. Hire someone to fix the problem and look at it as a very important lesson learned.

If your state doesn't have a contractors licensing board contact the Better Business Bureau or your local government for their recommendation. Ask some of your friends if they have had any problems like this and how they handled them.

For some more tips about hiring contractors go to
http://gregvan.com/library/homeowner_checklists.htm

Greg Vandenberge has been in the home building and remodeling business for over 30 years. With this knowledge he has created a few websites that provide useful information for home owners as well as contractors. His main goal is to educate professionals in the home related businesses, dealing with problems that can easily be avoided with just a little bit of information.

His website http://gregvan.com provides all kinds of answers to remodeling and new house building issues that could create major damage as well as possible damage to your pocket book.

Plumbing Problems and Solutions - Repair Manuals

If you've owned a home for over 20 years, there's a very good chance, that you've had a water pipe break, a drainpipe clogged, a toilet that wouldn't flush right, or a water leak that damaged part of the home. If you don't know, what you're looking for and you have no idea what damage can be done, over time, this could mean trouble for the homeowner.

Plumbing problems like these have been around and will be around for many years. Knowing what to do about them, how to repair them and what materials will be needed, can be found in plumbing repair manuals for books. How would you like to have a professional plumber to advise you on your plumbing repairs. What if I told you that you could have a plumbing professional on hand at all times. Is this something that you might be interested in.

Well I can't guarantee that, so let's forget about what I just said and go to the next best thing. Plumbing repair manuals are full of tips and advice that when needed can sometimes be priceless. If water is leaking from the ceiling in your home and you have no idea, where the water is coming from or how to stop it from leaking, any information could be priceless and I mean priceless.

Plumbers, usually charge over $100 an hour for emergency service. I've seen plumbers come to peoples homes, turn the water off to the house, stop the water from leaking and now it is no longer an emergency. The plumber quickly pulls out an invoice for the plumbing repairs and it could be over $1000, if you decide that this is ridiculous and choose not to pay it, the plumber can hand you a bill for stopping the water leak. Some of these bills are what I would consider quite ridiculous, for just shutting the water off.

You're not paying the plumber for the amount of time it took him, you're paying him for his knowledge. If you knew where to shut the water off, you wouldn't have an emergency situation and could contact a plumber during normal hours. This could save you hundreds if not thousands of dollars.

With a simple home repair manual or a home plumbing book, you could prepare yourself for a situation like this and other plumbing problems. Most home repair manuals have general solutions and advice and can solve most of the problems around your home. If they can't solve all of the problems, they can probably save you from major catastrophes like a water leak.

Most of the time it's not the water leak that will cost the most money, it's the damage the water will do to your furniture, carpeting, wood flooring, walls or ceilings. A little information and preparation can save you a lot of money in the long run.

Home Plumbing Books

You are free to copy this article to your site as long as you include the following resource information with an active link to my site:

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a home buyers guide to take some of the frustration out of home shopping.

Basic Home Electrical Wiring - For the Do it Yourself Home Electrician

The Green Bay Packers were one of the most successful football teams and Vince Lombardi said something to them that I will never forget," This is a football." All the football players laughed and he said that we're going to start with the basics and that's what I'm going to do, with this article.

Let's start with our electrical wire, the two most common electrical wire sizes, that will be used in most homes, will be 14 and 12 gauge electrical wire. Let's clear something up, right off the bat, the smaller the number, the larger the wire. In other words a 12 gauge electrical wire is a little bit larger and will carry more electricity, for longer distances than a 14 gauge wire.

What about electrical outlet plugs? These plugs are usually the same, except for the fact that they come in different colors. When I said that most electrical plugs are the same, I'm talking about your standard wall outlet plug. There are different electrical plugs that will be used for air conditioners and some kitchen appliances like 220 Volt electric stoves and ovens.

What about your home's light switches? Your standard two way light switch will usually turn a one light on or a group of lights on, from one location. A three way light switch will usually turn one light on or a group of lights on from two different locations. A four way light switch, will usually turn one light or a group of lights on from three different locations.

It doesn't get any more basic than that. I hope this gives you a better understanding about your home's electrical system.

If you're really interested in learning more about remodeling, new home construction, home maintenance, home repairs and really want to get the nuts and bolts of home improvement. Visit our web site and select from the best-selling home building books on the Internet.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

If your looking for some more home inspection pictures or home building ideas.

Thanks For Reading My Articles

Tile Grouting Tips For Your Bathrooms, Kitchens and Floors

Isn't tile grouting supposed to be simple, if you read the directions and watch a couple of videos? What could make tile grouting so difficult? Grouting your tile isn't that difficult, by the time you're done reading this article, you should have a pretty good idea how to grout your floors, bathrooms, kitchens and anything else that requires tile.

I used to have problems grouting tile, but after I read the directions, I became a grouting wizard. This sounds hard to believe, but after reading the directions on the tile grout bag, I became a grout master. I know, you the type of person who never read the directions, you simply add water, mix and start grouting.

It's time to change your thinking about, whether or not the directions will be helpful. Whether it's about grouting your bathroom floor or putting together your home barbecued. I read one thing on the grout bag and it changed my entire grouting career.

The grout should slake. After you're done mixing the grout, you should wait between five and 10 minutes to let the moisture soak into the grout mix. Do this once, and you will never go back to mixing your grout and applying it, as quickly as possible after it has been mixed.

For more information on grouting, remodeling or home repairs, I would recommend reading books on home improvement and home repairs. Some of these books can make a big difference in your home improvement abilities as a handyman. I would also recommend reading more articles, there's plenty of information about tile and grouting, all over the Internet.

Click here if you are looking for some more Bathroom Remodeling Ideas

If you're really interested in basement remodeling and repairs, you should click on this link Home Repair Tips. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks for reading the article

How to Protect Foundation Plumbing Pipes?

If you install any underground plumbing pipes, in your concrete building foundation, you will need to protect them, from the concrete. You can use a variety of products and the most common of them will be a Styrofoam wrapping that can be purchased at most plumbing supply stores.

Let's start with the waste pipes, that are made out of plastic. The concrete could actually start to put pressure on the plastic pipes as the concrete starts to expand and this pressure could actually damage your new waste pipes.

You don't need to wrap all of the plastic waste pipes, only the parts of the waste pipes that will be exposed or in direct contact any concrete, but you do need to protect every copper water supply line that will be buried under the ground or exposed to the concrete, with a plastic sleeve. These products can be purchased again at most building supply or plumbing supply stores.

If these pipes aren't protected properly, you could find yourself within a short time, repairing the pipes that are either inside of your concrete foundation or buried underneath your concrete foundation. Either way, this isn't going to be a good thing.

You definitely need to wrap a plastic sleeve around the water supply pipes that are going to be buried or in direct contact with the concrete. This is a must and most building departments will require your plumbing pipes to be wrapped, before it they will sign off on your rough foundation plumbing inspection.

However, for the waste pipes, you can actually use cardboard to protect them. If you're short on funds, why not grab some cardboard boxes, dismantle them and start using cardboard to wrap the pipes, with a little duct tape.

There are plenty of ways to save money in the construction business, buy a few books, read a couple of articles, with a lot of pictures in this can provide you with lots of construction information, from experience building contractors.

Check out some of the best selling Home Building Plumbing Books all on one website

If you're really interested in basement remodeling and repairs, you should click on this link Home Repairs. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks for reading our articles

Bathroom Fans and Attic Ventilation

Attic ventilation is a critical component to maintaining even temperatures in your attic all year long. In the summer it saves on the life of your shingles by keeping the boards cooler and decreases your cooling costs in the winter weather by diminishing the temperature difference which in turn prevents moisture build up in the form of condensation. Did you know that having a proper amount of attic ventilation is even required to enforce the warranty of most shingle manufacturers?? When it comes to mold the most import ventilation concerns occur in the winter. In the winter during the coldest months as we run our furnaces, hot air escapes into the cold unheated attic space. When the escaping hot air emerges into the cold attic it rises as heat always does. It seeks out the highest portions of the attic where it then coalesces against the cold boards of the roof. This hot- air-mass-meets-cold-surface phenomena results in a condition known as dew point, which creates moisture in the form of water droplets and ice crystals. The nails themselves also will contribute to this moisture problem as iron is a good conductor of temperature and will readily convey the biting chill of cold winter air directly inside the attic. The evidence of this, can be seen in the form of drips and of drip spots underneath the nails themselves.

Bathroom fans vented directly into the attic or Soffet areas rather than straight through the roof are also to blame for exacerbated moisture problems which lead to mold, wood- rot and health problems. The more adults showering in the house and the longer the showers the more moisture will enter an attic. In fact in some families the bathroom fans alone are the sole culprit responsible for major mold infestations!

If you want to eliminate attic mold permanently you NEED to get EQUAL amounts of Intake Air and Exhaust or Out-take Air into your Attic!

Building scientists have proven that using a balanced ventilation system that utilizes equal amounts incoming and out going air. Incoming air comes in from under the eves through vents cut in the underside of the roof overhangs which are called soffets. Proper soffet ventilation is essential to large amounts of incoming air needed for intake. Many attics were originally vented properly but have become packed with insulation along the way by an over-zealous insulation contractor or homeowner, in an attempt to actually stop air from coming in, sadly a common mistake. This mistake was very common in the 80's and 90's. There are two basic types of Soffet vents: either a contiguous vent or a individual vents which come in round and square varieties. I generally prefer to use 6 inch by 12 inch square vents because of the ease of installation and the low material cost. They work surprisingly well and offer a lot of surface area. They can be purchased easily in brown white and silver to match virtually any siding.

Out-take air, exhaust air ventilation can take 4 basic forms: Gable end vents, ridge vents, box vents or power vents. Of the four the ridge vent is to be preferred, due to its location at the highest point of the attic, namely the ridge. Because heat always rises it is passively efficient at exhausting large amounts of heated air without the use of electricity. Be sure to select a ridge vent without a complicated filter which can become clogged; I prefer the simple metal designs for their simplistic efficient design and operation. Box vents while older and more dated can be efficient if there is a sufficient number of them located across the surface. If your attic already has square, can, or box type vents but not enough of them, it can be a less expensive solution to an inadequate exhaust air problem. The reason is simple they are cheap and easy to install and like the square intake vents can be easily purchased in several colors to match any shingle. If you have a hip roof there may be insufficient ridge length to allow for sufficient out-take; box vents can be an ideal solution for this problem. Powered vents work well, but are dependent upon electricity for operation. This both costs money and is subject to wear and tear of moving parts. Additionally in the event of power outages can leave the attic over heated, for these reasons the author does not recommend them.

Beware of mixing two different kinds of ventilation!!!

By far one of the most common, and the most troubling ventilation mistakes is the mixed use of two completely different ventilation systems. For example mixing a ridge vent with a box vent or a previously installed power vent or gable end vents. What goes wrong is this: air always follows the path of least resistance and looks for the nearest opening , often the ridge will draft air from the box vents and short circuit the entire exhaust air systems, eliminating any chance of correcting the water/moisture issues. It can also bring unwanted weather snow debris etc into the attic because box vents and gable end vents were not meant to be intake vents, which can cause tremendous damage! So remember don't mix two ventilation systems pick one and stick with it ensuring there is enough of whatever vent system you choose.

Is correcting my ventilation a cure for a mold problem in my attic?

Sadly NO, it is not a cure for mold but just for ventilation problems which create moisture issues. No matter who installs your ventilation system in the winter if you are running supplemental heat in your home your attic will be subject to some moisture from time to time during the coldest days. For this reason and several others it is a must to actually treat the mold with a system designed to remove it completely without leaving behind mold or poisonous heavy metals paints and chemicals that can make your family sick. Even dead mold can still affect your health and make your family sick. It is also a good idea to hire a mold contractor with a ventilation expert on staff, because hiring a roofing contractor and a mold contractor is always more expensive!

Did you know most contractors use toxic chemicals to kill mold which may contains carcinogens which are cancer causing agents?

In fact ,sadly, I have seen many many attic projects fail after so-called "professional treatments" :( ! That's why we train other contractors from around the world in the efficient removal of mold using family-safe all natural products that are absolutely lethal to mold. For detailed diagrams and photos of ventilation projects feel free to visit us or call us directly!

Charles Boday CMI, CMRC, CMLCC

http://www.safemoldsolutions.com

http://www.superdrybasement.com

Call Direct 1-800-948-4947

Charles Boday is a Certified Mold Inspector and a Certified Mold Contractor, and he is a graduate of the Certified Mold Inspector & Contractors Institute. He is also a member of the National Association of Mold Professionals He is also a certified Environmental Inspector. He is also a Certified Crystal Meth Lab Clean Up Contractor. He has extensive experience reviewing and investigating toxic type cases for law offices prior to the attorneys taking on cases for litigation. He has worked with some of the countries top scientists seeking alternative poison-free mold remediation techniques. He is state certified to teach the realtors' continuing education course" Toxic Mold! What every realtor should know!" and is the author of the same. He is also a Certified Crystal Meth Lab Clean up contractor. He routinely works for Fanny Mae as well as many other top lenders like HSBC Household First Merit etc. repairing extreme mold damaged foreclosed properties

He is also an experienced foundation waterproofer and structural repair analyst. He has developed multiple proprietary waterproofing techniques for both interior as well as exterior foundation systems. He has testified as an expert foundation witness and is the Author of the books: The Ultra Dry Basement: understanding and correcting foundation water problems and Ultra Bond Construction Techniques

Structural Framing Beams

Repairing Scratches in Laminate Flooring

When I moved into my home, the floor in the living room had just been refinished with beautiful honey toned laminate flooring. It was beautiful and it fit my decor perfectly. The only problem was the fact that one of my chair had popped a cap, unbeknownst to everyone involved, and it wasn't until a few weeks later, when I went to rearrange a few pieces of furniture, that I noticed it. Much to my horror, the gleaming floor beneath the chair had become a scratched mess and I shuddered at the thought of having to fix them.

Now, I'm sure that I am not the only person who has had to deal with scratched laminate flooring. In fact, I'm almost positive that the problem is universally shared. The simple truth is, if you are going to own laminate flooring, at one time you will own scratched laminate flooring. Most people would simply sigh and shift the furniture around to cover the evidence, something that I actually did for a few months, but laminate flooring can be fixed without having to tear out pieces and replace them.

Most repairs in laminate flooring are pretty minor. A glass may have fallen and gouged a small hole or the kids may have scraped a toy car, minus wheels, across a small section. The scratches and holes are simply surface damage but they definitely detract from the once shiny beauty of your floors.

With minor damage, you will only need to do minor repairs to your laminate. Unfortunately, as with most repairs, there is nothing regularly stocked in your shelves that will fix the floors. You will need to make a run to the local home hardware or flooring store to pick up a repair kit. Some manufacturers will make repair kits for their flooring so the best place to start is the store where you purchased your flooring.

If you aren't sure of the manufacturer or the manufacturer does not have a repair product, simply purchase a generic repair kit. A repair kit usually consists of a tube of putty or wax. This is your actual filler. Some repair kits have colored putty while others have paint that you mix to create the matching floor color; this you mix with the putty before applying. Both are perfectly fine to purchase and you will usually run yourself about ten to twenty dollars.

Some repair kits come with putty knife and everything else you need but if it doesn't simply pick up a putty knife while you are at the store. Popsicle sticks work perfectly for applying the putty to the crack.

Before you start repairing your scratches and dents, make sure the area is clean of any debris and is dry. There is no sense repairing a spot if a patch of dog hair is going to be glued into the floor. Once the area is prepared, it's time to get mixing.

If you went with a colored putty that matches your floor, all you will need to do is spoon in the putty, but if you went with a mix, you will need to match and create the desired color. Once you have that, spoon in the putty and smooth with the putty knife. Remove any of the excess putty so you have a smooth surface. Lastly, wipe the area around the scratch, being careful to not touch the repaired scratch with a clean cloth to wash away any residue.

Once it dries, your laminate flooring should look as good as new.

Sometimes, you will find the occasional scratch that is too shallow for the putty to work properly. If this is the case, the best product on the market is ScratchAway. This is a spray on treatment for any small scratches on laminate and other wood flooring. All you need to do is spray the area and then buff until it is dry.

So with a few little tricks of the trade, there are very few reasons why you can't enjoy scratch free laminate flooring for years to come.

Sirena Van Schaik is a professional writer who provides information on wood flooring and laminate flooring for A1 Wood Flooring

Nailing Or Screwing Drywall

If All You Have is a Hammer Everything Starts to Look Like a Nail

We were watching the film Mulholland Drive yesterday and it suddenly hit us like a bolt of lightening. How many times we misdiagnose a situation. How many times we carry on a path not knowing that our assumption have taken us miles off course.

Its like playing golf and only knowing how to use three clubs and having to use them in every situation.

Its like looking through a camera zoom lens instead of a wide angle.

Its like blindly following anothers opinion.

The fact is that most of our lives are spent reusing the information collected in our formative years. Thus, when anything new enters our arena we immediately go to the past to try to make sense of it.

The outcome is: we each live an illusion. We each see our world through some really heavily tinted spectacles. We each act as though we are a hammer and everything that comes in front of us is a nail.

The problem is. IT DOESNT WORK.

We were amazed how easily we fell into the trap. How easily we interpreted what was happening before our eyes and made it logical. How easily we searched for closure.

To make us comfortable we wanted to put things into a comfortable category. We wanted to place happenings in a box in the same way a librarian codes books for easy access. Ah! That goes in the family box. That is rude behaviour. That is unacceptable in public. That shows he is uneducated etc etc etc

Yes, you could argue that this form of coding is important in life because it helps us get through life quickly.
BUT!!!
Why do we like to put ourselves and others into psychological boxes? What is it about us that we like to say we are this type of person or that? Why do we want to limit ourselves? Why do we want to sell ourselves short?

Its like being a carpenter who only has a hammer in his toolbox. We are restricting ourselves beyond belief. Just imagine how restricting it would be if you only had a hammer in your toolbox? How can you get passionate about anything if all you are capable of is knocking the brains out of any information that comes your way?

How do you find out what you were brought onto this planet to do if all you can do is respond in the same way to whatever is put in front of you.

How do you develop and grow your children if all they see is the same behaviour irrespective of the problem posed.

How do you rise to the challenges of our society if all you do is apply the same reasoning even though it doesnt fit?

As Howard Schatz. The famous New York dance photographer stated in one of his books:

I told each dancer that when it was easy, it had probably been done
before, probably many times. I explained that only when it was so hard
that it was nearly impossible were we perhaps close to getting something
unique and extraordinary.

Is this why we like to categorise situations and people? We actually dont like hard work.

Is it that we dont like the pressure of being our true selves? Because to do that we have to stand out?

Is it that we cant cope with being unique and extraordinary, so we just want to be similar and ordinary?

Is it that we are afraid of who we might be? Are we afraid that we can be successful? Afraid that if we admit to ourselves that we have talent we might have to do something with our lives?

Is it that we dont really want to find out who we really are and what we are capable of?

We dont know about you but we want to be unique, we want to find out and use our uniqueness. We want to be fulfilled. We want to find our energy source that is released when we are doing what we are intended to do. We want to be in the flow, as some writers describe it.

We have come to realise that what stops us from being in the flow all the time. What stops us from releasing our passion. What stops us from behaving naturally. What makes us waste energy.

FEAR.

Fear keeps us placing people and situations into categories.

Fear stops us from leading ourselves.

Fear stops us from letting go of the past.

Fear keeps our habitual patterns in place.

Being frightened and feeling second best stop us from finding our true selves.

Fear buries the natural me.

A musician must make music, and artists must paint,
a poet must write, if he is to be ultimately at peace with himself.
What a man can be, he must be
(Maslow)

What about you?

Good Luck

Graham and Julie

www.desktop-meditation.com

To improve your intuition, initiative and energy levels please go to: http://www.desktop-meditation.com Its free.

Lowest Construction Bids

Help When Buying Replacement Windows

When is the Best Time of Year to Consider Buying Replacement Windows?

Buying replacement windows can be a big project. Here are some tips to get you started on the right track to a successful window replacement.

The best time of year to consider buying replacement windows is around spring or fall. Buying replacement windows and having them installed will leave your home open to the elements for a day or so. You want to avoid hot, cold and rainy times of the year if possible.

The first thing anyone should do is budget for the windows. This can become a big factor in your choice. Prices of windows vary greatly. Your budget may or may not allow you to get into higher design options. This is one of the most important tips.

You need to know which windows, if not all, have to be replaced. Look at the type of window and decide on whether you want to replace it with a new style or use a style just like your old ones. You'll need to evaluate how your original windows were installed as well as note any potential problems with tear-out and preparation for the new windows.

Buying Replacement Windows

Once you have a good understanding on what you need, call around and get estimates on the installation. If you are able to, it is possible to install the windows yourself and save money. But make sure you have enough and experience and expertise to be able to perform this project. An improper window installation can cause many problems.

If you need an installer after buying replacement windows, make sure to go over your different options with them. Make sure they understand what results you want from your new windows. Before choosing a contractor you should get several bids and compare them. Getting a guarantee and signing a contract is important when buying replacement windows and hiring an installer.

Another important aspect of hiring someone to do a remodeling job is the need to feel comfortable around him or her. Whoever you choose will be working on your home, and you'll want to feel at ease about letting them work. If you are not sure about any given contractor's credibility, ask them for references and have them checked out.

For further satisfaction do not pay for the job until the job is done right. A deposit may be necessary but try to keep it as low as possible.

This article was written by Gregg Hicks of http://www.reliableremodeler.com which provides Internet-based home improvement information and services. Offering homeowners a simple, quick, and free way to access, qualified home improvement remodeling contractors.

How Tough Are Concrete Epoxies

What are some problems painting metal siding

Painting metal and aluminum siding can become a nightmare if not done right. Over the years I have worked on and repaired many homes with metal siding. Metal siding is real common in mobile homes. Most older mobile homes use aluminum paneling for their exterior siding.

Most painted metal siding seems to last at least 20 years. The reason for this is the paint is baked on in a factory giving it a high quality and nice looking surface. This baked on method is used for painting aluminum and most metals siding that gives the product a long life.

I lived in a mobile home park for a few years and my next door neighbor's mobile home had never been painted and was over 45 years old. He would go out and washed the mobile home once a year with some TSP soap while using a brush on the end of an extension pole to clean the home.

His mobile home might not have looked brand new but it was definitely in great shape. Over the years he had developed a few scratches and some dirt that was hard to wash off but that was about the extent of the damage to the painted metal siding.

Well we painted our mobile home and used an expensive metal primer along with some expensive paint from Dunn Edwards & Co... This paint worked great. We lived there for around four years and never had any problems once the home was painted. Having been in the construction business I knew we had to use a good metal paint primer in order for the paint to stick to the baked on paint process for the metal siding to look good.

Here's my advice to you when painting metal siding.

1. Make sure the metal siding is clean. Use TSP soap along with a scrub brush and scrub that baby clean. The cleaner the metal surface the better the new paint primer will stick or adhere to the old paint.
2. Follow the instructions carefully on the paint primer can when applying the primer. Do not paint below or above the recommended paint temperatures.
3. Make sure you explain to the paint salesman at whatever store you're in that you are going to be painting metal siding. Get the right paint primer.
4. I would love to recommend a paint primer but cannot because I don't want to get a phone call from anyone a few years from now telling me the paint is peeling off of their home. Let that responsibility become the paint manufacturers.
5. Let the paint primer dry for the recommended time as per the directions on the paint primer can. I prefer letting the paint dry at least one week. The reason for this is some paint primer's stay soft for a while and if you paint over them immediately they doesn't seem to bond as good and sometimes will stay soft for a long period of time.
6. Apply your final coats of paint following the manufacturer's instructions on the paint can.

There you have it painting metal siding is all in the preparation of the surface you are painting.

Have fun painting and always read and follow the manufacturer's recommended instructions for the products you are using. These people test their products constantly and know the best way to apply them to any surface.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on different Types Of House Siding

Electric Dryer Gas Conversion Ki

Bathroom Rugs - Necessity Or Fashion Accessory?

Bathroom rugs are extremely popular in areas around the world such as Los Angeles, where a warm climate encourages individuals to keep their floors bare most of the year. With the extremely popular bathroom rugs that are so common in these areas, it is easy to create some warmth in the winter simply by putting down a bathroom rug and allowing the product to do its job. With the increased popularity of bathroom rugs in areas such as Los Angeles, it is easy to see that there is no end in sight for these types of products. With so many people and so many individuals making so much of an effort to utilize bathroom rugs in areas such as Los Angeles, it is not surprising that the popularity for these types of products has begun to skyrocket for those individuals and who are in need of some type of covering for their bathroom floor.

While many individuals avoid putting a bathroom rug down due to the moisture and amount of water that gets splashed around in the bathroom, there are specifically designed bathroom rugs that repel water and are less likely to be subjected to mildew. Utilizing these types of bathroom rugs is a good way to keep your floors warm for your comfort if you get out of the bath as well as increasing the level of safety and preventing slips. Slipping and falling in the bathroom is one of the most common incidents of injury in the home. It is a good idea to avoid this type of injury with the use of a bathroom rug, especially in warmer areas around the world that tend to have bare floors, such as Los Angeles. With a bare floor, you can keep your house cool in the summer, and when winter comes along, you can put down a bathroom rug to keep your feet warm.

With the emphasis on bare floors and bathroom rugs in cities such as Los Angeles that traditionally keep floors bare in the summer, it seems obvious that there is a great need for a type of covering on floors in the winter in order to preserve the warmth of the room as well as provide comfort for people who walk barefoot in the mornings after getting out of bed. By providing a warm surface such as a bathroom rug, you can make your home more comfortable all around.

PJsSleep.com is a Los Angeles mattress company that offers bedding, organics, and other home furnishings.

Surviving As A Contractor

Choosing Window Blinds - 12 Tips to Avoid Expensive Errors

Nowadays there are numerous designs of blinds suitable for almost every type of window. Here are some tips to help you select the most appropriate model for different domestic situations.

Windows with a beautiful view:

When you have a window with the view of a scenic landscape, seascape, pool, mountains, etc., you should consider a blind that pulls up as tightly as possible to minimise obstruction of the view. However, we often suggest that windows with a view are left unobstructed, perhaps only with a set of dress curtains to coordinate with the rest of the decor. Avoid bulky wooden venetian blinds.

Arched windows:

Arches can be a problem and are often treated as a rectangular aperture. To retain the arch you could consider pleated or honeycomb blinds which fan into a semi-circle.

French Windows (Doors):

French doors can be tricky because the blind or the controls can get blown around when the doors are open, or caught in the hinges as the doors are closed.
The key is to think of the door as a window, which happens to be in a door. It is usually best to use the same products as those already on windows in that room, for consistency of style. Wood Venetians work quite well because their weight flaps around less in a breeze. Roller blinds with a friction lock mechanism are good because they eliminate cords & chains.

Bay Window:

Most products will work in a bay, but care is needed in measuring and design. A bay will need between 3 and 5 individual blinds. Roman blinds need to allow space between each one to avoid contact and entanglement as they move up & down.
Skylights:

Consider using a highly efficient insulating honeycomb blind or a roller blind. These are available in different materials that can control the influx of heat and light. The honeycomb helps provide an extra degree of thermal insulation. Roller blinds fitting inside a skylight recess usually need to be compatible with the skylight; especially if it is an opening window. Blinds fitted outside the recess on a sloping ceiling need side rails or tension cords for support to prevent sagging.

All skylight blinds need a control mechanism such as a wand to activate them when you are standing below them.

Sliding Patio Doors:

Verticals are very popular for sliding doors, despite their diminishing popularity in general. They can be installed within the frame or over the glass, but don't necessarily choose a vertical if the other room products are something other than verticals. Consistency is important, too.

Very large windows:

Whenever a window covering is extremely large, its weight makes it difficult to raise and puts unnecessary tension on the strings (which may cause the strings to break). You may need to consider a special control option, or alternatively consider dividing them up into multiple blinds on a single headrail, or order multiple blinds and install them side-by-side.

Hard to reach windows:

Consider specifying extra long cords so you can open or close a product. Many blinds can be made with remote controlled motorised operation, though this is not cheap and you need to consider where to fit the mechanism.

Front of house windows:

It is common to want the front windows of your home to be as uniform as possible-just how consistent is up to you. What ever style of blinds you like, it should be possible to achieve this.

Windows with humidity:

All quality products should be water resistant. But high humidity or widely changing humidity can be a problem for wooden Venetian blinds, fabric Roman or laminated fabric roller blinds.

Harsh sun or bright outside light:

To eliminate glare on a TV or computer monitor, or to prevent a bright security light from beaming in to your bedroom, use blinds with no stitch holes. Blackout lining is also recommended. Honeycomb blinds provide superior insulation under harsh sunlight.

High activity areas:

If you have kids in your home, you should get the highest quality, sturdiest products. Also you should consider the safety aspect of pull cords and chains to avoid the risk of tripping or stangulation accidents.

Finally

There is a wide choice of blinds available, so much so that you might feel you are spoilt for choice. In that situation it is always prudent to seek advice from an interior designer. If you speak to a designer they will have the design freedom to suggest window dressings other than blinds, whereas if you speak to a specialist blind company be aware that they are out to sell blinds - indeed as many as possible!

Bronia Suszczenia is co-founder and Creative Director of Art from the Start Ltd a firm of interior designers in Yorkshire England. She has also recently established Fabric Gallery and Interiors a retailer of quality curtain fabric and designer wallpaper in York England

Gas Burning Wood Stoves - All You Need to Know

A gas burning wood stove is no longer a heavy stove which provides only heat. It has undergone many changes to fit the ambience and dcor of your house. The body of the stove is still made of cast iron and it comes with a vent. Other than that, it is very attractive to look at while being very fuel-efficient.

Such a oven also keeps with the EPA standards and does not pollute the atmosphere. Moreover, it uses natural fuels like propane which emits very less fumes. Even the ones using wood as a fuel use wooden scrap or pellets as fuel. That is, these stoves use those parts of wood which would otherwise be wasted. Hence, they are a very good way of saving money.

The energy prices always tend to rise. However, switching to gas burning wood stoves would definitely save some of the money spent on paying energy bills. These ovens come with vents, which can divert heat into other rooms. Some of these use the vents of the existing fireplace of the house to divert the heat. These stoves are also very easy to install. They come in with an in-built program to shut down on reaching a temperature of above 70 degrees Fahrenheit. This is a safety measure which takes away your worry of manually controlling the temperature. In normal fireplaces, you would need to control the temperature.

However, if you do install a gas burning wood stove, you must get your fire alarm checked regularly. This would just be an extra precaution. It must meet EPA standards. But, other than a few precautions, you are otherwise all set to own trendy new gas stoves. The cast iron body makes the oven very chic to look at. The dancing yellow free flames created by the natural gas add a very warm and cozy feel to your home. So go ahead and get your own gas stove!

Visit CORE online to get free access to more information and resources on gas burning stoves.

How to Fit a Shower

If you are looking to install a new shower in your home, the first steps will be to measure, prepare, and fit the shower. A shower kit will always come with installation instructions, which should be followed to get the best result. Here are a few basic, general guidelines that will help as well. As always when tackling any home improvement project, with or without professional help, ensure that all of your permits are in order before you begin. Shower fitting is not recommended for beginner do-it-yourselfers.

The base of any shower is the shower tray. The shower tray holds the water before it drains, keeping it from spilling out on to the floor. Make absolutely certain that the area is level and that the shower tray will be properly supported. Many shower trays are made of acrylic or resin that can be prone to flexing when not adequately supported. Too much flexing can lead to a break in the seal between the tray and the shower enclosure, causing a leak. Avoid this difficult and expensive problem from the start by taking steps to make sure you have the right kind of supports in the right places.

Make sure you have enough room underneath the shower tray for the drainage pipe to run. Measure carefully to ensure you have enough space for this. If you don't, build your shower floor to be a bit higher to allow the correct amount of space for the drainage pipe and waste trap. Make sure you have access to these things as you install the shower tray, so you can check the seals between the drain of your shower tray and your drain pipe before you close it up.

Before installing anything else, make sure that all walls to be included in the showering area have been well water-proofed. You may choose to use tile or a shower kit with plastic wall panels. Which ever route you choose to take, this is a vital step both in beautifying the shower as well as preventing water damage to your home.

The shower screens will be installed last. A good fit is made from accurate measurements! The type and size of the shower screen panels will depend on the size and shape of the shower tray you've purchased. They should fit together without gaps.

The shower screens, whether purchased separately or as part of a kit, will also have instructions from the manufacturer which should be followed for a solid and lasting result. Check all of your caulking and seals to ensure that everything is watertight.

Written by James Chapman, a director of Bella Bathrooms who supply Showers for the UK market.

Bella Bathrooms is an online retailer formed by 2 plumbers from the North East of England. Having hands on experience of custom bathroom installation and products has enabled Bella Bathrooms Ltd to only select quality bathroom products for their online shop. They sell bathroom furniture, bathroom suites, showers and bath related products for consumers through the United Kingdom.

Wind Turbines For Home Use - Can You Really Save Money?

Green energy is the first preference of many individuals from all across the globe. In fact the power of wind can be a great source of green energy generation and it turns out to be pretty cost-effective as well. You need not pay the hefty electricity bills for the black energy supplied by the distributors. With the wind turbines for home use you can generate the required amount of power at home and reduce the annual electric expenditure by a few thousand dollars. You just need a tower to install the turbine and the area should have wind-blowing speed of 10 Kmph. As you switch over to wind energy, you would also be saving the atmosphere from 200 tons of harmful green house gases every year, which is definitely a remarkable reduction in air-pollution.

Some people feel that the wind turbines for home use will exert much noise and create sound pollution which is not true at all. The small and compact wind turbines for home use will make little noise which is ignorable but will defnitely not wake up the neighbours from their sleep. In fact there is another misconception that they will hamper the television signals but it is in no way a proven fact. They are available for around $6000 but the price will vary according to the features and size of the home wind turbine. You will be saving some money on your utility bills which will round up to a substantial amount yearly. If the turbine is producing more energy than you require then you can also sell the excess to others to pocket a substantial amount.

In short, you are not only taking an initiative towards a pollution free environment but also helping in restoration and savings of the natural resources like petroleum and coal.

Make sure to click to visit my site on Renewable Power to find the best guide for making your own power!

Working With a Contracted Painter - Homeowner Tips

Help with home improvement work should always be welcome with open arms by homeowners with no real experience in the matter. Going at it alone is usually not a wise decision for homeowners when it comes to the more complicated tasks such as painting the house or other complex projects. With a professional approach and help from contractors, homeowners can rest assured that their projects will turn out looking magnificent and the process will go much more smoothly than if the homeowner had hired an amateur or done the work themselves.

A contracted painter is a valuable addition to any remodeling project. With a very important aspect of the project taken care of, homeowners should rest easy knowing that they can now focus their attention on other areas of the remodel. Knowing exactly what they are doing, a contracted painter will take on a project efficiently and with little problems. Knowing how to deal with problems when they arise and hopefully avoid them before they even come up, these professionals prove their worth each time they are hired by homeowners looking for a good paint job. With a well-painted house, homeowners are usually happy they went with a professional.

The value a contracted painter holds often goes beyond physically painting the house. Helping with the planning aspect of the project is widely accepted as a big plus if the contractor is able to do so. With their experience and training, contractors are usually able to offer advice and lend a hand when planning these expansive remodeling projects. This often proves to be one of the most valuable resources a homeowner can hope for when taking on large remodeling projects.

More information on College Works Painting is just a click away.

Best Home Wind Power Kits

Now is a good time to get in on free renewable energy, and home wind power kits are just the way to go, especially if you're living in an area with reasonably constant winds. Combining multiple wind turbines with some deep cycle batteries can provide your home with as much energy as you need. But what is the most effective and inexpensive home wind power kit available? The article gives you a few pointers.

Professional Home Wind Power

The most common thought for most home owners is to get a professional to install a system for them. It's not surprising that these so called "professionals" charge ridiculous prices, and often provide very average service. The truth is that you can pay up to and over $30,000 for a pretty basic system from one guy, while the guy next door gets the same system for half the price! Shop around, do your homework, and consider all the options.

Cheaper Wind Power Options

Many people will find it cheaper and easier to opt for self made wind power over the more expensive options. If you're willing to do some of the dirty work yourself you can setup a turbine for under $200 from materials obtained from the local hardware store. Get the neighbor over to give you a hand, or hire some extra help if you want. Either way you'll be saving a fortune in the end.

The internet has become the best resource for home made energy information. In fact, you can get detailed plans and schematics for wind turbines, solar panels, batteries, and even biodiesel over the internet. Most of the guides are cheap and instantly downloadable.

If you're serious about saving a bucket load on electricity, check out this Renewable Energy Systems website. It's got plenty more advice on the best home wind power kits.

Building a Porch

If you are a do-it-yourselfer, you probably don't want to call a contractor to build a porch onto your home; not when you know that building one is something you are perfectly capable of doing yourself. After all, it is something anybody can do, provided that they have the right tools, a high patience level, some people to help with the lifting and a good set of instructions or plans.

Building a porch is a fantastic project, but it requires a lot of work. It is a lot different than building a simple front stoop. After all, it is going to serve as an extended entry way to your home. You want it to be well built and have some character.

You will need to decide how big you want it to be. Go outside and measure out just how much square footage your porch will need. You will need to know this information when it comes time to buy the materials needed to complete the project.

Before you start building one, however, you will want to make sure that you have the legal right to do so. Adding anything onto your home usually takes permits from the city and sometimes the county. There are regulations that will need to be followed and you will need to have your property inspected before you even begin your materials shopping.

When you go to buy the materials make sure your materials are pressure treated or is wood that has been given some elemental protection so that it will be able to stand up to the weather for a long time. You might also think about getting some protective paint or stain. In addition to the flooring, you will also need to buy enough wood to build the frame and supports. This will take wooden beams in various dimensions. If you do not have experience in this sort of thing, a call to a contractor or an experienced lumber person will be able to tell you what you need.

Another option when it comes to building a porch is to build a concrete floored one. Of course, in order to do this you will want to have had some experience with mixing and pouring concrete. If you do not have experience with this, you will want to enlist somebody who does have experience to help you.

Depending on the size, building a porch can be a huge undertaking or merely a weekend project. Small side ones shouldn't take long, but one that is larger takes time, effort and a few permits. You will still be able to save a lot of money by building it yourself. After all, anybody can do it. It just takes the right materials, the right tools and a few people to help you lift the heavier materials. When you are done, you will have a porch that your family will enjoy for years to come.

For more information on how to build a porch and other porches related topics visit The DIY Home Guide at http://www.thediyhomeguide.com

Do it Yourself Solar Panels - Simple Process to Cut Your Home Electric Bills

Our monthly electricity bill is one of the largest household expenses. We need electric power to run all our electrical equipment. While power demand is expected to rise, the cost of electricity will increase in the near future also. This is due to limited supply of oil needed to generate power by utility companies. One of the simplest ways we can take to reduce our power consumption is by using Do It Yourself Solar Panels. How does the procedure works? This article will shed some light of the science of a home solar power system.

Before you start any home construction project, you have to be well versed with hand tools and ample working space. To build your own home solar energy system, you have to construct a solar array on the roof. A solar array is made from a series of solar cells linked together. The function of the solar array is to collect the sun energy and convert it into electric power. To harness the solar power, the solar array is connected to a charge controller where electric current will be diverted into deep cycle batteries bank. The batteries will be used to store electric power to run our electrical appliances. Since a battery can only store Direct Current (DC), you will need an inverter to convert it to Alternate Current (AC). AC will be used to power our homes.

With proper planning, do it yourself solar panels have the potential to reduce our home electric power consumption. This can be done by slowly changing our home power demand to the solar energy system. With rising energy cost, any idea that can help us to save cost would be a blessing.

Want to know how you can build your own Home Solar Panels to reduce your electricity bill for under $300? If you are good with hand tools, start a Do It Yourself (DIY) project to construct a residential solar array to harness free energy from the sun. What you will need is a step by step instructional guide. Get a comprehensive Solar Power For Homes guide review at http://www.DIYSolarHomes.com/

Things 99.9% of Home Owner Won't Inquire About When Replacing Windows Next Spring

As a customer shopping for windows these are some of the basic feature a you should inquire about before you agree to upgrade.

A knowledgeable window technician should be informing about quality of the material used in the manufacturing of the sashes, frame and hardware. The process of assembling the window should be fusion welded to ensure that the joints never fail during extreme outdoor temperature and burglary.

This is important because lower quality material used in windows, may not withstand the extreme conditions and put you life at risk. The material of choice UPVC windows (Unplastersize Ploy vinyl chloride). This newly developed material more durable, glossy and easily cleaned than regular PVC frames.

The seal of the window should be co-extruded with the frame so it cannot separate fro the frame. For maximum energy saving performance the insulated glass unit must be finished with low-e coating and filled with argon gas.

Some window manufacturer even included a light tint to reduce the UV ray, so be careful not to mix and match when replacing window individual windows. One last thing ask for your incentive once you are ready to purchase you`re entitled to it.

Replacing your existing windows to reduce your energy bill and increase your home comfort and curb appeal is not the only solution for defective window. Depended on the extent of the damage to the window you can either.

Consider this when you have professionally installed high quality insulated glazed units windows you can enjoy the benefits of

lower energy bills

Less or no cold drafts

Reduction in sound transfer for outdoors to indoors

High value (equity)

Enhance appearance and curb appeal

Bragging rights.

Government grants, rebates and tax credits.

As a customer seeking window you should expect to upgrade from your existing hydo sucking frames to more energy efficient replacement windows that are attactive and adds to the appearence of your home plus within a resonable budget. Don't settle, click here and fill in your name and email to book a free professional no obligation estimate and presentation, so you can make an informed decision on your new UPVC replacement windows for maximum energy saving.

How to Install Door Locks - San Deigo Home Tips

Recent reports show that the majority of home burglaries occur due to an unlocked or faulty door. If your door is not safe and secure, you might as well just leave it open and invite the thieves in. No one wants to do that, so the next option is to fix the locks or replace them. You can do it yourself or call a NYC locksmith. If you are good at handy man tasks, it may be no problem to replace security locks.

The first issue you will find in replacing locks is choosing the best ones. There are a wide variety of security locks and styles on the market today. Most of your decision will be persuaded by the type of door you have. If you have an exterior door, you may want to consider a set of security locks. These locks would include a dead bolt. There are different types of dead locks available on the market. You can choose from one that locks internally with a lever, or you may want to go with the type that locks from the inside with a key.

After you have chosen the right type of lock, you will need to choose between a right- or left- handed style. The style is based on which side your door opens from. You will also need to consider if your door swings in or out when opening. For your locks to work efficiently, you will need to know these details. The next step after purchasing is to ensure you have proper tools. You will need basic hand tools like a hammer, screwdriver, and a chisel. You will want to start your installation by first removing the old lock or door knob. Make sure you clean up the surface of the doors and remove any caulk or grime that may be there.

Then it's time to start installing the new locks or door handles. You should first check to see if the new locks will fit inside the holes for the old. If they do not you may need to enlarge the holes with the chisel. You can mark the area with a pencil to ensure the right size. Once you have the new lock in the proper size opening, you will need to read the individual instructions for your new locks. Each type of lock will have its own exact way to be installed. Most are very simple, but some will require exact steps for proper fit. Don't worry, if it gets too complicated, you can always call your local locksmith for a little help.

Rob Hargreaves - An American Locksmith of leading locksmith company named Mr-locks. Call or contact me for all locksmith services.

Installing Solar Panels For Your Home - Professional Or DIY Installation, Which to Choose?

When it comes to installing solar panels for your home, many of my readers have asked if they should engage professional installers or go the DIY route. In this short article, I'm going to lay it out for you so that you can make an informed decision on which way to go - professional or DIY.

Read on!

Professional Installation

If you look through your local directory or the internet, you should be able to find a good number of companies that provide professional installation for a fee. The installer will first check whether your home is suitable for installation. This usually means a south-facing roof and an area with little tree cover. The company will then take you through the pros and cons of the system and at the end of it, you'll know the appropriate installation system for your home and the cost.

Talking about costs...professional installation doesn't come cheap. An average home solar panel installation costs about $26,000....and that's a hefty investment!

So what does this mean for the average home owner?

Assuming you're paying 15 cents per kilowatt for electricity. At a cost increase of 10% a year, it will take a long 10 years for your power bill savings to offset the solar panel costs! If the power charges are less or if you take out a loan to pay for the solar panel system, well, the payback time just takes longer!

DIY Installation

If you think installing solar panels on your own is a daunting task, rest easy. With the recent U.S. government push on home renewable energy, we're now seeing companies producing step-by-step instructional guides that take you through the entire process. Most of these packages are inexpensive (under $50) and come with videos so that you can learn exactly how assembly and installation is done. Nothing is left to the imagination.

The important thing to installing solar panels is to find the right guide that is best suited for your needs. These guides will also recommend where you can get the parts on the cheap. So all in all, you're looking at about $200 to get your very own solar panel system up and running.

Technical support is usually just a phone call or email away, so that you can rest easy if you're stuck and need assistance.

The best thing about building your own DIY solar panels is that you can start small and later scale up the system to power more appliances at home. You can even go completely off-grid and take the power companies out of the equation! What's more, they will even buy excess electricity that you generate each month. And that's extra cash you could use!

So, Which Way To Go?

It all boils down to this. If you've deep pockets and want a hassle-free installation, get it professionally installed. But remember, it can take you decades for your investment to pay off.

On the other hand, if you're one who can follow instructions and don't mind a little elbow grease, then go the DIY route. For a low initial outlay of $200, you can easily recover your investment in a few months...instead of years!

Installing solar panels for your home can be a fun weekend project for you and your family. More importantly, you will go green and cut your monthly energy bills for good!

Want to build and install your own solar panels but don't know where to start?

Fret not! Many people just like you have successfully built these on their own to DRASTICALLY cut their monthly electricity consumption. They are already shaving $1000s off their energy bills every year. If you need STEP-BY-STEP guidance in installing one, I have reviewed the Best Online Guides on Homemade Solar Panels for your convenience. These highly recommended guides provide EASY-TO-FOLLOW instructions that will help you save money in no time.

Dave Keller is an Renewable Energy Specialist who takes pride in helping the average consumer save on their energy bills using simple DIY devices... and give power companies a run for their money! For a candid review of the best-selling guides, go to his website at http://www.HomeSolarPanels4u.com now.

Construction Estimating Institute - An Excellent Learning Destination

If you are a foreman, estimator, superintendent, project manager, or any other worker related to the construction industry, then you can augment your skill by joining institutes such as the Construction Estimating Institute. If you want to join the construction industry, then too the institute is an excellent destination for pursuing vocational education.

The institute was founded in 1982. It offers training and continuing education seminars in project management, field supervision, blueprint reading and building and sitework estimating. The training that is imparted is of the highest quality and can immensely benefit all those working in the construction industry.

Further, amongst the different courses on offer are a variety of online courses as well. These include courses such as construction cost strategy, course in financial basics, a course in Florida construction regulations, advanced 2004 FBC building/structural summary course, as well as courses related to estimating, bidding and on-site safety.

However, if there is a requirement for private, onsite construction training, it can be very easily arranged. Those who seek such a service need to simply put in a request for an onsite personalized training course. The chosen personalized course can even include areas that you want to specifically work upon.

There are many construction training institutes in the market. Some examples of such institutes are American Society of Professional Estimators, AGC Online Institute, RedVector.com, Construction Experts, Inc., Contractors Institute, and Jade Electric, Inc. However, what sets Construction Training Institute apart from all such institutes is its non-profit motive that drives the institute's educational endeavors.

Indeed, Construction Training Institute is a non-profit organization, working to impart high-end skills in estimating and management. There is only a nominal cost of the courses involved. However, it is chiefly intended to take care of the costs incurred in the design and distribution of the courses.

Further, for those who do not intend to join any course but would still like to profit from the knowledge accumulated by the institution's minds, doors are open to its bookstore. Amongst a variety of literary resources on offer, the 2008 Construction Cost Guide with CD ROM is the most popular one.

Apart from it, the bookstore also has some titles for various state-level general contractor examinations as well. Some such titles available are Residential Contractor Complete Book Package, General Contractor Complete Book Package, Building Contractor Complete Book Package, Roofing Contractor Complete Book Package, and Underground Utility Complete Book Package. A budding contractor can read books for whichever examination he/she is taking.

Institutes like the Construction Estimating Institute can help any contractor or any other personnel related to the construction industry with improving his/her estimating and managing skills. For a small price, this learning destination gives you an excellent opportunity to learn how to improve your services.

Read more information on Construction Estimating including software and calculators at => http://www.construction--estimating.com

Inspect Foundation Problems - Carlsbad Home Construction

The foundation walls are connected to the top of the footings. The purpose of a foundation is to carry the weight of the house structure down through the foundation to the footings.

Whatever their construction, (concrete, brick, concrete blocks, etc.), foundation walls crack because of lateral force, settling, heaving or uneven loads (more weight than designed on a specific section of the foundation), of the foundation walls. Natural forces such as earth quakes can also be a contributor in earthquake regions.

To begin your inspection, use a pad and pencil while observing the exterior foundation. Make notes of cracks and their locations. When inside the lower level, you will want to try to locate them on the inside. If the crack goes entirely through the foundation it may be a red flag. Small hair-line cracks that do not go through the foundation wall are common and nothing to worry about; they may have been caused by shrinkage of the concrete or mortar joints.

A found crack sometimes has a similar type crack on an opposite wall of the foundation. Similar cracks on opposite walls may have the same cause, with the exception of horizontal cracking caused by a lateral force.

Types of Cracking
Vertical and 45 degree cracking is usually caused by settlement and heaving. Horizontal cracking is commonly caused by side pressure on the foundation, such as hydrostatic pressure (a lateral force). Surface cracks that do not go entirely through the wall and with no signs of displacement are not normally a structural defect. Isolated vertical cracks that do not extend to the lower edge of the foundation wall are usually shrinkage cracks. They are caused by the concrete shrinking during curing.

Causes of Horizontal Cracking
The foundation should act as a retaining wall, resisting lateral pressure of the soil on the outside of the basement or crawl space. If the foundation does not provide enough lateral support, the walls will deflect inward and create horizontal cracking. Some of the causes are foundation walls that are too thin or do not have, (or not enough), reinforcement, such as rebar in the concrete foundation, backfilling the foundation too soon before the foundation has a chance to fully cure, or during back filling if big stones or hard frozen chunks of ground were dumped against the foundation.

Causes of Heaving Foundations
Heaving cracks in foundations made out of brick, blocks, or stones,(not concrete), will generally have cracking in the form of a step, called "step cracking". Step cracking usually follows the mortar joints in these materials.

In concrete foundations, cracks from heaving are usually vertical and are wider at the top of the crack than at the base.

Some areas of the country have expansive soils, which increase in size when they absorb water, causing heaving cracks. Moisture added to dry expansive soils, say from a sudden down pour, will drastically change the volume of the soil and cause serious heaving problems as well as structural damage in some cases. When the expansive soil dries, the shrinkage can also cause a pulling effect on the foundation. The method of prevention is to maintain the soil moisture content, by keeping the soil as dry as possible along the foundation. This can be achieved by proper grading around the perimeter.

Causes of Foundation Settlement
Settling of the soil under the foundation is usually the cause of settlement cracks in the foundation walls. Cracks caused by settling resemble cracks caused by heaving, except the crack is wider at the lower end of the crack.

If a crack is active the crack may still be moving, (getting bigger, etc.) To identify an active crack, it will have sharp edges, clean inside of the crack and sometimes with bits of concrete still in the crack. Old cracks will have dust, dirt, paint and insect parts in the crack.

To determine the severity of a crack or its cause, it may need to be evaluated by a geotechnical engineer. Large cracks 3/8" wide should be carefully examined. Cracks can be measured by the engineer, to determine if it is moving or if it is stabile. Many times Home Inspectors call on the services of an engineer, to be sure the foundation is sound. As a past Home Inspector, I have been surprised several times to find questionable cracks were sound without a concern. I was always glad it was verified for the sake of the buyer or yourself in your case.

What to look for inside the house structure:

Doors and windows that are stuck and misalignment (gaps)
Foundation settlement can cause doors and windows to be come misaligned. This can be seen when observing the edges around the windows or doors, where they close. Look for gaps larger on one side than the other. This can help determine where the settling is occurring.

Cracks in the walls
Settlement will usually cause wall cracking. Settlement cracks are wider on one end than the other. Let it be known wall cracking can also be caused by the house expanding and contracting through its seasons. If there is no evidence of foundation defects and there is wall cracking, it, more than likely, is caused by the latter.

Sloping or tilting floors.
I have learned during my home inspection career that most people will not notice sloping less than 1/8" slope per foot. 3/16"slope per foot is noticeable to most people. A family living in an older home for a long time might not notice sloping even if severe. We tend to adjust to gradual sloping over time.

If there is doubt, use a level to determine if the floor is level. Floor elevations should be recorded for future reference in the inspection.

Unless the sloping is substantial or extensive remodeling is planned, the best repair would be to stabilize the foundation. Extensive re-leveling in an older home may cause more than expected damage to the interior walls, ceilings, doors, windows and cabinetry.

If the home has been stabilized and future movement is unlikely, buyers will often accept the uneven floors.

This article was written to act as tool to guide and assist a DIY Inspection on foundations. Gary wrote the BAIR (Building Analysis Inspection Report) System, which is a DIY Inspection that consists of a lot of instructional detail (a guide) written about any of the many components found in the home. The BAIR System has instruction on how to inspect a foundation and explanations on the findings; this article will help with more information, if needed.

Review and download at: http://www.bairsystem.com

Solar Panel Costs - Professional Vs DIY Solar Panel Installation

If you're wondering about the solar panel costs you expect to pay to harness free energy from the sun, look no further. In this article we're going to take a quick look at what you can expect to pay to have solar panels installed in your home. Read on to learn the costs involved in professional and DIY home solar panel installation and how one of these can save you thousands of dollars.

Professional Solar Panel Installation

Many companies provide professional installers to build and assemble solar panels for your home. But these do not come cheap. Typically you can expect to pay about $3000 or more to engage a qualified technician. If you choose to engage a professional installer, he will work with you to help you understand the installation details and how to get uninterrupted power supply.

You should be able to find a professional installer in your area...just look through the local directory or harness the convenience of the Internet.

Build Your Own Home Solar Panels

This is fast becoming a favorite energy-saving project for many households I know. If you think this is daunting, it really isn't NASA science. With the U.S. government's push towards the use of renewable energy, the technology behind DIY solar panels has now been made accessible to the average family. Put off by expensive solar panel costs? Then go the DIY route!

There are many excellent and inexpensive guides that you can download online at low cost. These DIY instructional packages provide you with step-by-step assembly and installation procedures that a typical layman can understand. Talk about a "dummies" guide to DIY solar panel installation! Then head down to your local hardware to gather the parts and components required. Most guides will tell you where you can get these really cheaply...all for $200 or less.

So, my advice is...if your family budget allows it, and if you want a hassle-free installation, go for a professional installer. It will cost you $3000 or more, but it's still an investment that will pay off itself in the long run.

But if you're game for a little elbow grease and relatively easy DIY work, I encourage you to build your own DIY solar panels. For just $200 (manual plus components), you're really getting big bang for your buck. The guides and videos will teach you all you need to know to get your solar panels up and running in a couple of day. Plus, you get to customize your energy saving kit that complements your house design and layout.

You don't need to pay hefty solar panel costs to harness the benefits of solar energy. So...why not put on your DIY hat and start slashing your monthly electricity bills for good? Like many folks I know, you'll glad you did!

Want to build your own home solar panels but don't know where to start?

Fret not! Many people just like you have successfully built one on their own to DRASTICALLY cut their monthly electricity consumption. They are already shaving $1000s off their energy bills every year. If you need STEP-BY-STEP guidance in installing one, I have reviewed the Best Online Guides on Homemade Solar Panels for your convenience. These highly recommended guides provide EASY-TO-FOLLOW instructions that will help you save money in no time.

Dave Keller is a Renewable Energy Specialist who takes pride in helping the average consumer save on their energy bills using simple DIY devices... and give power companies a run for their money! For a candid review of the best-selling guides, go to his website at http://www.HomeSolarPanels4u.com now.

Having a Healthy Contractor Business

Budgeting is one of the biggest pains in the neck in any business including the contractor business. But, any good successful long term contractor knows it is absolutely necessary for success. The mentioning of budgeting can make just about anyone's teeth hurt. This is especially the case with any contractor who loves his or her business because it is all about making something from your skills. Who wants to be sitting with a pencil, paper and calculator figuring out numbers? You want to be out there constructing something. Well, you can get to it right after you figure out your budget!

There are really two budgets you need to have as a contractor. Well, there are more than two but let's use the two major ones as an example. There is the yearly budget where you figure out how much it will cost to stay in business, how much you can generate in sales and how much you want to make in profit. Then there is the project by project budget which has to fit into their yearly budget at certain intervals. Each one has to be done with care with the numbers being as accurate as possible. This is important because too many times people fudge their budgets and then wonder later on why their business failed. Don't fall into that trap.

Anyone in the contractor business needs to be realistic in figuring out there yearly and project by project budgets. There is no sense in lying to yourself, be honest about what you feel you can and cannot do. A reasonable and conservative budget can always be adjusted later on if things go right. But, a sloppy and over optimistic budget can cause some serious financial damage to your company. Every contractor wants to succeed but it is the ones with an obtainable really budget that get ahead. And, in this economy that it is ever more important to have a budget and live by it.

So, yeah it stinks to have to come up with a budget but it is one of the single most important things you can do for your contractor business and you will be happy you did at the end of the year and at the end of each project. Being on budget or ahead of budget feels great! Going the other way can really bring you down, literally. So do your homework and make a budget that works.

Josh Macmichael

http://www.contractorblab.com
http://www.contractorblabblog.com

Energy Bills on the Rise

High Energy Bills on the rise, and right now a lot of people are worried about high home energy bills, including the costs of air conditioning, heating, and electricity.

The good news is that there are a lot of easy, inexpensive ways you can do to bring your energy bills down immediately.

Every kilowatt hour (kWh) of electricity produces about 1.7 pounds of carbon dioxide equivalent. Take a look at the number of kilowatt hours. Double it (in most cases) and you're looking at pounds of greenhouse gas emissions. Want to think about pounds of carbon emissions and how to lose them?

What effective methods are available to reduce the energy we use.

Certain Appliances we use can make a huge difference. How we use those appliances can also make a big difference. Installing a different hot water heater will most likely have the biggest effect o our electric bill since it is the largest energy consuming device we have in our homes. Here are some facts about hot water heaters fa

• Money Wasted By The US Heating Hot Water With Tanks: $5,218,007,101, that is literally 25% of dollars spent. Nationwide more residential energy is consumed by domestic hot water than on anything but heating, and air conditioning.Switching to an instant
• Electricity is the WORST way to heat hot water while natural gas and propane gas are much more efficient, smarter choices. Based on national fuel price averages of $1.46/ccf and $0.09/kwh, the cost/100,000 BTU's is $1.46 for natural gas and $2.64 for electricity. Just under 60% of North American households have access to natural gas, and if you don't, propane gas is available to almost everyone and is still a better value than electricity. In addition electric water heaters have only a small fraction of the capacity of gas water heaters. So if you like expensive, short showers, with cold water at the end, use electric; otherwise gas would be a better choice.
• Modern gas fired tankless water heaters are the best alternative available to todays homeowners to reduce their residential energy consumption. A typical gas fired tankless water heater costs about 2-1/2 times as much as a standard tank water heater. However it will pay for itself in just a few years or less, and will last twice as long a tank.

Swithtching to a more efficient hot water tank may initially cost more than an electric one, however it will definately pay off very quickly.

Home heating is also an area that could use some change. Efficient, ductless, compact, direct vent systems are a great technology. Believe it or not Ductless systems also allow for a healthier air quality withing the environment of your home, whether it is Direct Vent, Hearth or Hydronic Air Handlers.... Hot water heating is also a great energy efficient technology.

There are also electric saving devices that can be installed directly to the Main Power Box of your house that will literally recycle the unused and wasted electricity back into your home. This can result in as much as a 30% reduction in Energy consumption. At a simple average of 15% reduction of energy use, This type of system in 500,000 homes across this county will annually reduce the need to generate 17 megawatts of electricity saving 42,250 tons of coal or 231,500 barrels of oil and reducing by 98,250 tons of carbon dioxide, 42,000 pounds of nitrous oxide and 221,500 pounds of sulfur dioxide of annual greenhouse emissions. These types of systems are very inexpensive and have one of the quickest Return on Investment which can be from 6 months to 2 years, depending on individual use, which can vary considerably. Some of these appliances also have the ability to offer Whole House Protection from power surges and spikes, which we are constantly under attack if you are on the grid. This can actually create another undetermined savings in your electronics and appliances by lengthening their life.

There are technologies that can also be used with the Washing Machine. Technology that allows us to wash without the use of Hot Water, without the use of Detergents, an added bonus because you not only save energy from using only cold water, but by not using detergents you do two things; detergents add tremendously to a huge problem in our water supply, so by not using them is an ecological conservation. It also allows your clothes to last longer and retain good coloring as well as stay fluffier without the residue. The new technologies also kill bacteria and viruses, so cleaning your clothes so much more efficiently than what we currently use.

Solar heating and Solar hot water tanks are one of the most efficient ways of adding to the energy efficiency of your home. Again this technology has a larger initial install cost, but will save in the long run as well as now in reducing our carbon emission exponentially. That latter part is the most important part right now. And there are a number of incentive grants and tax breaks for people switching to using these great conservation technologies.

Cindy Adams

http://www.ecohomeplus.com

cindyadams@ecoquest.com

8008893079 to leave a voice message.

Floor Decorating Ideas - Bamboo For Flooring

When I was growing up the choice of floor decoration was oilcloth [a thin type of linoleum], or linoleum [lino] in the bedrooms and, in the living rooms downstairs, lino covered with a large rug or, if you had a better budget, herringbone hardwood flooring with a large rug in the middle. A stair runner lined the center of the stairs held in place with a brass stair-rod. These ideas moved on into the 1970s with fitted carpets which had large swirly patterns: you were really somebody if you could afford fitted carpets! Fitted carpets came and stayed, the only real changes being the textures and fabrics, the colours and whether the carpets were plain or patterned. These all changed according to fashion. Cork tiles made a brief appearance as being the must-have flooring options in the bathroom and kitchen. They never really went out of fashion as they are practical and warm underfoot.

However, the late 1990s was when laminate flooring made its appearance and hardwood flooring came back with a vengeance. Floors to aspire to are now hardwood floors, with the whole of the living area having the same kind of flooring. Gone are the days of the unhygienic carpeting in the kitchen: this has been replaced by a multitude of flooring options, from recycled rubber to slate, stone, hardwood, laminates, and tiling. Many bedrooms are also finished with laminate or hardwood flooring, brightened up with scattered rugs. In my own home, however, I have retained deep-pile carpets in the bedrooms and, in all the downstairs rooms I have installed hardwood flooring which has been stained and varnished to give it a deep timbre to bring out the beauty of the wood. It is so much easier to keep clean and I believe this is far more hygienic than fitted carpets everywhere which can harbour germs deep down in the fibres.

The number of DIY shops that sell both hardwood and laminate flooring is amazing when, if you think about it carefully, fitting flooring effectively so that it looks good and lies properly, is an experts' job. It is certainly not something I would consider doing. After all, if you mess it up, hardwood is not a cheap option - if you are paying out that sort of money, as far as I am concerned, it is better to pay a bit more and employ an expert to fit it properly. In this case, the end result well justifies the means! So, if you are choosing laminates or hardwoods, what are you going to be looking for? Good hardwood flooring will add value to your property and will last a lifetime. If it does start to look a bit tired, it just needs to be sanded down, re-stained and given a new coat of varnish. Solid hardwood flooring planks are available in cherry, walnut, maple, and oak. Also available are other woods such as teak and bamboo which, although not a wood but a grass, is very popular in these economically sustainable times.

Home Decorating Ideas offers quick cheap tips on how to decorate your house. Includes tips on decorating the office, living room, bedroom, kitchen and more.